Patna Petrochemicals Pvt. Ltd.

Better road - let's celebrate the journey.
Efficient and cost effective way for better road surface.

Products

Ushering an era of versatility & convenience in road construction. More...

Services

A range of innovative services that will meet our customer needs. More...

Applications

Find products based on your unique application requirements. More...

1
New Orders!
1144
New Enquires!
131
New Feedbacks!
397
New Registrations!

BITUMEN EMULSIONS RS1


Patna Petrochemicals Emulsion RS1 is a product manufactured out of bitumen dispersed into the water in the form of fine globules (micron size) by means of an emulsifying agent, the later acts to decrease interfacial stress between the bitumen and water thuis preventing their breakage during normal conditions of storage. This type of emulsion carry positive charges and is very much suitable for negatively charged aggregates exclusively and abundantly available in your country. These positively charged emulsions after getting in touch with the negatively charged aggregates deposes bitumen particles on the aggregates while water gets evaporated, this emulsions with low viscosity and fast setting time is an ideal product for spray application. Patna Petrochemicals Emulsion RS1 is manufactured strictly as per IS-8887:2004 and ASTMD:2397 and quality consciousness is maintained at all levels of manufacture.


PROPERTIES:

  • It is chocolate brown in color
  • It comes in liquid form
  • It does not heavy any smell
HomePic3

ADVANTAGES:

  • It is applied cold thus saving energy in place of firewood or fuel oils.
  • No health hazards because of absolute pollution free, thus environmental friendly.
  • Easy and uniform spray
  • High adhesive properties
  • Except heavy downpour, construction in wet weather possible
  • Low temperature curing, fast setting time
HomePic4

RECOMENDED RATE OF APPLICATION:

  • It is applied cold thus saving energy in place of firewood or fuel oils.
  • Bitumen surface
  • Aged bitumen surface
  • Primed surface
  • Non bitumen surface granular base (not primed) cement concrete pavement

2 to 2.5/10 sq.m

2.5 to 3/10 sq.m
2 to 2.5/10 sq.m
3.5 to 4.0/10 sq.m
3.0 to 3.5/10 sq.m


Galary3

PRECAUTIONS TO BE TAKEN TO ENSURE BEST RESULTS:

DO'S
  • Roll emulsion drum to and fro 5-6 times before use
  • Use Emulsions at temperatures above 5 C
  • PH Controlled water may be added to the Emulsion for dilution @1:1, if required, for better control on spraying and penetration. Entire quantity on thus diluted Emulsion must be use immediately for Prime Cost operation only.

DONT'S
  • Emulsion shouled be stored in open container/tank
  • Mix different type of Emulsion together
  • Fill loose earth in potholes before spraying emulsion
  • Spray Emulsion on dusty surface

COST COMPARISON:

In so many cases studied, total cost of construction with Cationic Bitumen Emulsions works out favourably, when compared with hot mixe method. A brief comprehensive cost comparison of Progressive Emulsion RS1 with hot mix may be provided on demand.


PACKING:

It is available in 200 liters capacity MS sealed drums which are very reusable. The material may also be arranged for supply in specified packing by the customers subject to cost variations.


STORAGE:

It must be stored in properly sealed drums under a cover, no matter whether it is a tarpaulin cober for storage place is recommended from 5 to 85 C


Rate : Rs. 0.00 / Tons

Products

ORDER NOW

E-Mail ID


Contact No.


 

Please provide us in details:


   

Is this your Requirement:




 

How soon you want to purchase:





 

Why do you need this:





 

Description:


 

Office Address : 304, Mahendra Lok Apart, Beside Jagdish Memorial Hospitals, Kankarbagh, Patna - 800020 ***** Factory Address : Mauza, Dehri, P.S. - Bihta, Dist. : Patna (Bihar),

Developed and Managed by : Rajeev Kumar Singh & Ravi Bhushan Singh (Mo.: 9431051043, Mail : rksinghmca36@gmail.com)